Overcurrent protection open-core current monitoring sensor for electric vehicles

Specification DataMeasuring Current Range100AAccuracy ClassClass 1Temperature Accuracy2ºCFrequency50-60HzWiring Diameter≤φ12mmOperation Temperature-20~+85ºCWithstand Voltage>3000VACResponse Time200mSCommunicationM-BUS Communication          Cautions of Smart Sensor:     

Featured Products

Over-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric Vehicle
Specification DataMeasuring Current Range100A
Accuracy ClassClass 1
Temperature Accuracy2ºC
Frequency50-60Hz
Wiring Diameter≤φ12mm
Operation Temperature-20~+85ºC
Withstand Voltage>3000VAC
Response Time200mS
CommunicationM-BUS Communication

Over-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric VehicleOver-Current Protection Open Core Current Monitor Sensor for Electric Vehicle          Cautions of Smart Sensor:
            1.Current value- Please specify your measurement range as per your application, for example if you are going to
            use it for detecting and sensing mA level or high  current range such as 500A/600A shall be first factor.
            2.AC,DC,or both AC&DC shall be the second factor. Now current sensor on the market usually are AC or DC type.
            But if you need both AC& DC you may need to use IVY brand- AC DC leakage sensor.
            3.Parameters-Please confirm what kind of parameters shall be measured or detected. For example our smart sensor
            with shunt can readout current, voltage,kWh, kVar, Cos
φ, Hz, THF, current cycle, starting waveform.
            4.Communication-RS485,M-bus, UART serial port are optional, if you have more requirements we can also develop for you.
            5.Installation Method, after making above decision you may also need to confirm the output terminal type, for example we have
            shunt / terminal / pillar / pins/ cable etc.
            6.
As there are many models of smart electrical sensor, plz refer to the detailed specification and use it as per the instruction.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours