Load pin - Introduction:
The TY2088 range of load pins are designed for the measurement of tensile and compressive forces across a wide range of applications, including crane/lifting, industrial, marine, offshore and civil engineering. Machined from high tensile stainless steel, our load pins are suitable for use in exposed situations including prolonged immersion in seawater. We offer a standard range of load pins, covering ratings between 500kgs to 500 tonnes, however, the nature of this type of product means that most load pins are manufactured to meet each customers specific dimensional requirements.
Load Pin Benefits:
Easy to install new or retrofitted
Robust construction
Replaces existing load bearing pins without any system modifications
Many special designes available
Can be supplied with int
Drawing:
:
Drawing:
:
| MODEL | TY2088 |
| COMPREHENSIVE ERROR | 0.05 |
| OUTPUT SENSITIVITY mV/V | 1.0 |
| NONLINEARITY %F.S. | ±0.015 |
| REPEATABILITY %F.S. | 0.01 |
| HYSTERESIS %F.S. | 0.01 |
| CREEP (30min) %F.S. | ±0.02 |
| TEMP. EFFECT ON ZERO %F.S/10ºC | 0.026 |
| TEMP. EFFECT ON OUTPUT %F.S/10ºC | 0.002 |
| ZERO OUTPUT mV/V | ±5% R.O |
| INPUT RESISTANCE Ω | 750±10 |
| OUTPUT RESISTANCE Ω | 700±2 |
| INSULATION RESISTANCE Ω | ≥5000 |
| EXCITATION VOLTAGE V | 10 |
| OPERATION TEMP. RANGE ºC | -30~+80 |
| OVERLOAD CAPACITY %F.S. | 150 |
| CAPACITY | 1Ton to 10ton |